A spa that feels brand new under the soak again. In-ground spa resurfacing in Long Beach for families and property managers.
Rough plaster, pitted interiors, stained spa shells and hollow spots are what most Long Beach owners notice first. Adams Pool & Spa handles in-ground spa resurfacing across Long Beach, CA with pebble, quartz and plaster finishes that restore a smooth interior, color uniformity and the 10 to 15 year surface lifespan you should be getting from your spa. Whether your spa spillway feels sandpapery, the waterline tile has calcium scale, or your bond beam has cracks running into the spa steps, we can refinish the shell down to the jet housings and bring it back to like-new.
How Much Does Spa Resurfacing Cost in Long Beach?
In-ground spa resurfacing in Long Beach typically runs $2,800 to $6,500. The number depends on spa size, finish (plaster, pebble or quartz), tile work, and whether the bond beam or spillway needs repair before the new surface goes in.
A plain white plaster refinish on a small built-in spa sits at the low end. A mini-pebble or quartz finish on a larger spa with new waterline tile and some crack repair sits near the top. Most Long Beach spas we resurface land somewhere in the middle. If your spa shares a bond beam with the pool, we can usually quote the spa on its own or bundle it with a full pool resurfacing service at a better combined rate.
Questions about pricing for your spa? Call Adams Pool & Spa at (562) 439-2693 and we'll walk through it with you.
When Does an In-Ground Spa Need to Be Resurfaced?
Plaster has a shelf life. Most in-ground spa plaster lasts 10 to 15 years before the surface starts failing. Quartz and pebble finishes usually run longer. Here's what tells you it's time.
How Is Our Spa Resurfacing Different from a Pool Replaster Job?
Spas aren't just smaller pools. They run hotter, they cycle chemistry faster, and the shell has more detail work (jet housings, spa steps, benches, spillways) where plaster likes to fail first.
Hands-on work, not subcontracted. Adam has been on Long Beach pools and spas for about 15 years. He owns the work from the walk-through to the fill, so the same crew you meet on day one is the crew troweling the shell.
Certified on the equipment you already have. We're a Jandy Certified dealer and a Pentair Expert Installer, which matters because spa resurfacing often exposes jet issues, heater flow problems, or automation that needs adjusting when the spa comes back online.
Lifetime warranty on NPT surfaces. Through our partnership with National Pool Tile, our pebble, quartz and plaster finishes carry a lifetime warranty on the surface itself. Most local crews warranty their work for one to five years.
And we don't push you into a pebble upgrade you don't need. If a plain plaster refinish is the right call for your budget and spa use, that's what we'll quote.
What Finish Options Do We Offer for In-Ground Spas?
Three finishes cover almost every in-ground spa we resurface in Long Beach.
Plain and colored plaster. The traditional choice. Smooth, classic look, lowest cost per square foot. Good for 8 to 12 years in coastal water if you keep the chemistry in line. Comes in white or tinted.
Quartz aggregate. Plaster mixed with quartz crystals. More durable than straight plaster, holds color longer, feels slightly textured. Common pick for spas that get heavy use.
Pebble finish (mini-pebble and standard pebble). Exposed aggregate with small stones troweled into the surface. The longest-lasting option, 15 to 20 years in most cases, and it hides scaling and stains better than any other finish. Mini-pebble is smoother underfoot for spa benches and steps.
We can match the pool finish if you're doing both at once, or go with something different for the spa. Pebble in the spa with a plaster pool is a common combo around Belmont Shore and Naples Island.
Related reading: residential pool resurfacing and pool replastering.
What Does the Spa Resurfacing Process Look Like?
Most in-ground spa resurfacing jobs take 5 to 7 working days from drain to refill. Here's the sequence.
We pump the spa, check the shell, mark hollow spots, and confirm the bond beam is sound.
The old plaster comes off with hand tools or a light jackhammer, depending on how thick the old surface is. For spas with thin plaster, we use a water jetting method instead to protect the shell.
Jet housings get reset, tile gets pulled and replaced if needed, and a bond coat goes on to lock the new plaster to the shell.
The crew trowels on the new finish (plaster, quartz or pebble) in one continuous pour. This is the step where experience shows.
For pebble and quartz finishes, we rinse the surface to expose the aggregate before it fully sets.
We fill the spa, balance the water, and walk you through the 28-day plaster cure so you don't leave marks on the new surface.
Can You Resurface the Spa Without Touching the Pool?
Yes, as long as the spa has its own shell or a separated bond beam. Most raised spas that spill into the pool can be refinished on their own. We tarp and protect the pool, drain just the spa, and work inside the spa shell.
Shared-wall spas (where the spa and pool share a wall with no structural break) are trickier. In those cases, we usually recommend doing both at once so the finish line across the shared wall doesn't show. If the pool is holding up fine, we can quote a spa-only refinish and a pool resurface for later.
Either way, we'll tell you what the shell will let us do before you commit.
Why Long Beach Spas Wear Differently
Coastal Long Beach water is hard, the air carries salt, and spas run hot. Those three things speed up plaster wear in ways you don't see on inland pools.
What Do Customers Say About Adams Pool & Spa?
"Adam walked us through every finish option without any pressure. The pebble finish on our spa looks better than the original and the crew cleaned up like they were never here.", Long Beach homeowner, Google Review
"Our in-ground spa was pitted and stained. Adam's team chipped it out, fixed a small crack near the jet housing and refinished it in quartz. It's smooth and the color is perfect.", Belmont Shore customer, Google Review
"Pool School was a nice touch. After the resurface, Adam spent 30 minutes showing me how to keep the new plaster looking good. No one else offered that.", Naples Island homeowner, Google Review
"Called three companies. Adam was the only one who said we could do the spa on its own and save the pool for next year. Fair, honest, good work.", Seal Beach customer, Google Review
Our Locations
Adams Pool & Spa Long Beach, CA Phone: (562) 439-2693 Hours: Monday through Saturday, 8 AM to 6 PM
We serve in-ground spa resurfacing jobs across Long Beach and the surrounding South Bay. Visit our Long Beach pool service area for more on the primary market.
Where Do We Provide Spa Resurfacing in the Long Beach Area?
Our Long Beach crew provides in-ground spa resurfacing to homeowners throughout Los Angeles County and north Orange County.
Primary service areas: Long Beach • Seal Beach • Naples Island • Belmont Shore • Lakewood
Extended service areas: Signal Hill • Bixby Knolls • Cypress • Los Alamitos • Rossmoor • Paramount • Bellflower • Downey
FAQ Frequently Asked Questions
How often should an in-ground spa be resurfaced?
Plaster spa finishes last 8 to 12 years in Long Beach coastal water. Pebble and quartz finishes run 15 to 20 years. If your spa is past that window or showing rough spots, it's time to talk to us about resurfacing.
How long does spa resurfacing take in Long Beach?
Most in-ground spa resurfacing jobs take 5 to 7 working days from drain to refill, plus a 28-day plaster cure. We'll give you the full schedule at the walkthrough.
What is the difference between spa resurfacing and spa replastering?
Replastering is one type of resurfacing (new plaster over the old shell). Resurfacing also covers pebble, quartz and aggregate finishes. Adams Pool & Spa does all of them. See our pool replastering page for the pool-side version.
Do you offer a warranty on spa resurfacing?
Yes. Our NPT pebble, quartz and plaster finishes carry a lifetime warranty on the surface through our partnership with National Pool Tile. That's one of the reasons Adams Pool & Spa customers stick with us.
What finish is best for an in-ground spa in Long Beach?
For coastal Long Beach water, we usually recommend pebble or quartz because they hold up better against hard water scaling and salt air. Plaster still works well for budget-conscious spa refinishes if chemistry is kept in line.
Do you also repair spa equipment during a resurface?
Yes. While the spa is drained we can handle spa repair and in-ground spa repair items (jets, heater, plumbing) in the same visit. Bundling saves a drain cycle.
Do I need a permit to resurface my spa in Long Beach?
Residential spa resurfacing typically does not need a Long Beach building permit, since you're refinishing an existing shell. New construction and structural work do. If your job includes bond beam repair, we'll let you know before we start.
Can you also install a new in-ground spa?
Yes. See our residential spa installation and in-ground spa installation pages for new builds.
Who performs the spa resurfacing work?
Adam and his crew. No subcontractors on the finish itself. Adam has about 15 years on Long Beach pools and spas, and Adams Pool & Spa is a Jandy Certified and Pentair Expert Installer. More on our team at about Adams Pool & Spa.
Ready to Refinish Your Spa?
Rough plaster, pitted shells and stained interiors don't fix themselves. Get your in-ground spa back to smooth, like-new, and a lifetime surface warranty in Long Beach. Call (562) 439-2693 or request a site visit today.
Our Services Most Popular Treatments
Pool Resurfacing Full pool resurfacing in pebble, plaster and quartz finishes.
Pool Replastering Traditional replaster for pools past the 10 to 15 year cycle.
Residential Spa Installation New in-ground spa design and build for Long Beach homes.
In-Ground Spa Installation Stand-alone built-in spa installations anywhere in the LA South Bay.
Spa Repair Jet, heater and plumbing repair for in-ground spas.
Pool Tile Repair Waterline tile replacement alongside a resurface or on its own.
What we restore on a spa surface
Surface plus the equipment + chemistry that protects it.
- Plaster
-
The interior finish coat on a gunite pool, traditionally white marble plaster. Modern variants include color quartz and pebble aggregate. Lifespan is 8 to 15 years before replastering is needed.
- Heat pump
-
An electric pool heater that moves heat from the air into pool water. Lower operating cost than gas in mild Long Beach winters; longer warm-up time than gas.
- Alkalinity
-
Total alkalinity is the buffering capacity of pool water against pH swings. Held between 80 and 120 ppm, it stops chemistry from rising or falling on every dose.